购买电视是为了收看电视节目，假如是木材加工类型的企业，必定会产生大量的木屑等废料，所以购买褐煤烘干机的目的就是干燥再利用并产生新的经济价值。也就是说，用户购买褐煤烘干机有很明确的目的，同时所干燥的物料也非常的固定，干燥其他类型物料的几率不大。 所以在设备出厂后，在厂家技术人员的指导下完成安装搭建以后，对褐煤烘干机的试机调试要依据主要的干燥物料性质来进行。举个例子，干燥污泥和干燥木屑在某些数据的设置上肯定有所差别。 试机的主要目的就是发现安装之后再运行上有没有问题，另一个就是在各个方面调整的******的状态。 比如说筒体的转速问题，褐煤烘干机通过筒体的旋转将内部物料在扬料板的作用下均匀抛洒开来，实现与热气的充分接触。所以转速大小对干燥的品质和速率有一定的影响。 还有想温度的调节，褐煤烘干机主要干燥木屑等物料，在温度的高低控制有自己特殊性，不同的物料温度的要求不同。所以在正式的生产开始前，把烘干机的各项都调整到位将事半功倍。

Lignite dryer data adjustment should be proper  buy TV to watch TV, if is wood processing type of enterprise, will produce large amount of waste materials such as wood chips, so the purpose of buying lignite dryer is drying re-use and generate new economic value. That is to say, users buy lignite dryer has a clear purpose, the dry material is fixed at the same time, the chances of that of other types of drying. So after the equipment factory, under the guidance of manufacturer and technical personnel complete set up after the installation, commissioning of lignite dryer debug according to the main dry material properties. For example, and drying of wood drying sludge on some of the data set is different for sure. The main purpose of the commissioning is found after installation again: do you have any questions on the run, the other is the best state of adjustment in each aspect. Such as cylinder speed problem of lignite dryer of the rotating cylinder through internal objects