木桶原理我们大家都非常熟悉，只要有一个地方出现短板，水就会流出。锯末烘干机达到理想的干燥效果同样如此，需要用户在多个方面努力。比如今天小编要与大家讨论的关于温度变化和控制的问题。 1、干燥的不同阶段温度差别。锯末烘干机从入口到物料出口是一个系列过程，其中内部的热气也在随之而不断的变化。例如进料口的温度和***后的排水阶段温度就有较大差别。 2、物料性质不同要求温度也不同。锯末烘干机的灵活掌控还体现在对于不同物料需要不同对待。因为所要求的干燥温度是不同的。某种物料温度正合适，换做另一种物料就可能出现焦糊情况。 3、干燥时长与受热变化。物料在锯末烘干机筒体内受到热气的蒸发，虽然温度的高低与干燥时长关系不大，但是时间长额，受到热气作用的时间也长，所以在干燥物料过程中要对温度、时间掌握。
Barrel principle all of us are very familiar with, as long as there is a place to appear short board, water will flow out. Sawdust dryer, the same is true of ideal drying effect, users need efforts in multiple ways. Such as small make up today to discuss with you about the temperature change and control problems. 1, the various stages of drying temperature difference. Sawdust dryer export is a series of process from the entrance to the material, the internal heat is also subsequently and constantly changing. For example, the inlet temperature and the last stage of the drainage of temperature has bigger difference. 2, different temperature and different material properties. Sawdust dryer of flexible control also in for different materials require different treatment. As required by the drying temperature is different. Some material temperature is appropriate, in another kind of material may appear anxious burnt status. 3, the drying time and heat changes. Materials by the heat of evaporation in sawdust dryer cylinder body, although the relationship between temperature and the drying time is not big,