高岭土烘干机粘壁现象处理方法

      高岭土烘干机粘壁现象是操作不当或设备故障造成的，当高岭土烘干机发生粘壁现象了应如何处理呢？从高岭土烘干机等设计过程来说，物料粘壁需要在设计过程中以合理的结构进行预防解决．尽管如此，在生产中也会产生突然粘壁的现象。在操作技巧时除了时刻观察操作参数的变化是否协调外，还要注意下列因素对机器的影响：(1)雾化效果不佳所引起的粘壁。如果雾化效果小佳，可能产生较大的雾滴．大雾滴可以飞行较远的径向距离。另外，大雾滴烘干速率较低，也极易粘壁。(2)调节风机的******可能导致气流的改变，前而曾谈到，气体流向对物料粘壁的影响***人，所以如需调整风量时要及时观察烘干效果： (3)风量大小对烘干机等影响，比如在有布袋除尘机的系统中，随着运行时间的延长，因附着在滤袋上的粉体层增厚而使布袋阻力增加，风量逐渐减小。烘干室风速的改变破坏了原来的平衡。另外，风量减小也会导致烘干室气体温度降低，增加了粘壁的机会； 技术人员曾在设计高岭土烘干机时，即使是一套***成功的设计案例，在操作中也难免出现故障。操作中有许多因素是可变的如气候的变化、季节的变化，我们只能尽量减小损坏。作为一名有经验的操作者，当回转烘干系统出现异常情况时，应在***短的时间内就能并找到原因所在，这样才能尽快排除故障。 高岭土烘干机价格、选型、工艺设计等问题
Kaolin dryer wall sticking phenomenon processing method Kaolin dryer wall sticking phenomenon is caused by improper operation or equipment failure, when kaolin dryer wall sticking phenomenon occurred should be how to deal with? From the design process, such as kaolin dryer needs in the design process of wall material viscosity at a reasonable structure of prevention solution. In spite of this, in the production also can produce sudden wall sticking phenomenon. When operating skills in addition to observing the change of the operating parameters is harmonious, also note the following: (1) the influence of factors on the machine wall sticking of atomization effect caused by the poor. If the atomization effect is small, may produce larger droplets. Large droplets could fly far away the radial distance. In addition, large droplets drying rate is low, easy to stick wall. (2) adjust the fan's biggest may lead to the change of airflow, and talked about before, the influence of the gas flow direction of wall material viscosity was the most people, so if you want to adjust the air flow should timely observation when drying effect: (3) the air volume size of the dryer, etc